Characteristic differences

1. Distiller laboratory heating element is characterized by low specific power consumption for obtaining 1 liter of distilled water.
2. It is worth noting the low level of water consumption for cooling to obtain 1 liter of distilled water.
3.  A special heat-protective casing that ensures the optimum surface temperature of the water distiller during use and protects personnel from thermal burns. 
4. The laboratory distiller AE-25 can be combined with a reservoir - a collection tank for storing purified water into a single system, with automatic shutdown of the water distiller after filling the collection. 
5. There is a possibility of connecting the water entering the distiller according to a two-circuit scheme, to reduce the consumption of source water by 70-80%.
6. The principle of operation of the water distiller is based on the condensation of steam generated by the boiling of water in the evaporation chamber, where the water is heated to boiling by an electric heater (heating elements). The resulting steam enters a condenser cooled with tap water, and, condensing, already in the form of distilled water, flows out into a collector for storing purified water. 
7. Units and parts in contact with steam and distilled water are made of stainless steel 12X18H10T and other materials that do not affect the quality of the water produced.
8. The possibility of obtaining distillate with a temperature of 25 to 40 ° C using a distillate cooler. Distillate cooler sold separately.
9. There is an automatic shutdown of electric heaters when the water supply is interrupted and the water level in the evaporation chamber falls below the permissible level.